BPJTD - 414, ULTRA VINYL SPRAY GREEN

  • MSDS: BPJTD
  • Manufacturer: PLASTI KOTE CO INC
  • Product Name: 414, ULTRA VINYL SPRAY GREEN
  • National Stock Number: 8010-00N031018
Product Identification

Product ID:414, ULTRA VINYL SPRAY GREEN
MSDS Date:11/06/1986
FSC:8010
NIIN:00N031018
MSDS Number: BPJTD

Responsible Party
PLASTI-KOTE CO INC
1000 LAKE RD
MEDINA, OH 44256
US

Emergency Phone: 216-725-4511

Info Phone: 216-725-4511

Cage: 07778

Contractor
TEMPO PRODUCTS CO A PLASTI-KOTE CO INC
MEDINA, OH 44256 US

Telephone: 330-725-4511

Cage: 07708

Ingredients

70@20C

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 20-25%

OSHA PEL 200 PPM;300 PPM STEL

ACGIH TLV: 200 PPM;300 PPM STEL

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


186@20C

CAS: 67-64-1

RTECS: AL3150000

Fraction By Weight: 30-35%

OSHA PEL 1000PPM

ACGIH TLV: 750PPM/1000STEL;9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


2-PENTANONE,4-HYDROXY-4-METHYL; (DIACETONE ALCOHOL). VP

CAS: 123-42-2

RTECS: SA9100000

Fraction By Weight: 10-15%

OSHA PEL 50 PPM

ACGIH TLV: 50 PPM


22@20C

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 5-10%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


5.1@20C

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: <5%

OSHA PEL 100 PPM;150 PPM STEL

ACGIH TLV: 100 PPM;150 PPM STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


-100F

RTECS: 9999999ZZ

Fraction By Weight: 19%


PROPANE

CAS: 74-98-6

RTECS: TX2275000

OSHA PEL 1000 PPM

ACGIH TLV: SIMPLE ASPHYXIANT


PROPANE, 2-METHYL-; (ISOBUTANE)

CAS: 75-28-5

RTECS: TZ4300000


BUTANE; (N-BUTANE)

CAS: 106-97-8

RTECS: EJ4200000

OSHA PEL 800 PPM

ACGIH TLV: 800 PPM


NONHAZARDOUS INGREDIENTS

Fraction By Weight: 10-12%


(TC23 OR EQUIVALENT), OR LEAVE AREA.

RTECS: 9999999ZZ


SLOWER THAN ETHER (PROPELLENT FASTER); PRODUCTS

RTECS: 9999999ZZ


OCCUP REPROD HAZ. SEEK CONSULTATION FROM

RTECS: 9999999ZZ


INFORMATION & SAFE HANDLING & EXPOSURE

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL:EXCESS INHAL OF VAP CAN
CAUSE NASAL & RESP IRRIT, DIZZ, WEAKNESS, FATIG, NAUS, HDCH, POSS
UNCON & EVEN ASPHY. EYE: CAN CAUSE SEV IRRIT, RED, TEARING, BLURRED
VISION. INGEST: CAN CAUSE GI IRRIT, NAUS, VOMIT, DIARR. SKIN: CAN
CAUSE IRRIT FOR SOME PERSONS. CHRONIC: NONE KNOWN FOR PROD. RPTS
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: HAVE ASSOC RPTD & PRLNG OCCUP
OVEREXPOS TO SOLV W/PERM BRAIN & NERV SYS DAM. SEV OVEREXP IN LAB
ANIMALS HAS ALSO CAUSED LIVER ABNORM & DAM TO KIDNEYS/LUNGS, &
SPLEEN. INTENTIONAL MISUSE BY D ELIB CONC & INHALING CONTENTS MAY
BE HARMFUL/FATAL. NOTE: (TOLUENE CAS # 108-88-3 APPEARS ON NAVY
LISTING OF (ING 13)
Medical Cond Aggravated by Exposure:CAN CAUSE ALLERGIC RESPIRATORY
AND/OR SKIN REACTION.

First Aid

First Aid:INHAL: REMOVE TO FRESH AIR. IF BRTHG IS DFCLT, ADMINISTER O2.
IF BRTHG IS STOPPED, GIVE ARTF RESP & SEEK MED HELP. EYES: FLUSH
W/H2O FOR @ LST 15 MIN WHILE OCCAS HOLDING LIDS OPEN. GET MED ATTN.
INGES T: DO NOT INDUCE VOMIT (ASPIR OF MATL INTO LUNGS CAN CAUSE
CHEM PNEUM, WHICH CAN BE FATAL). KEEP WARM, QUIET & GET MED
ATTN/POIS CTL CTR. SKIN: WASH W/SOAP & H2O/VARIOUS HAND CLEANERS,
(SUPP DATA)

Fire Fighting

Flash Point:0F,-18C (ING 6)
Lower Limits:1%
Extinguishing Media:"ALCOHOL" FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP. H2O
SPRAY MAY BE INEFTIVE. H2O MAY BE USED TO COOL CLSD CONTRS TO PVNT
PRESS BUILD-UP & POSS (SUPP DATA)
Unusual Fire/Explosion Hazard:CLSD CONTR MAY EXPLODE &/OR AUTOIGNITE
WHEN EXPOS TO EXTREME HEAT. VAP ARE HVR/AIR & MAY TRAVEL ALONG
GROUND/MAY BE MOVED BY VENT & IGNITED BY (SUPP DATA)

Accidental Release

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. VENTILATE
AREA. ABSORB LIQ ON PAPER, VERMICULITE, FLOOR ABSORBENT, OR OTHER
ABSORBENT MATERIAL AND TRANSFER TO A CLOSED CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT STORE IN AREAS ABOVE 120F, OR
IN DIRECT SUNLIGHT, OR NEAR HEAT OR OPEN FLAMES. DO NOT PUNCTURE OR
INCINERATE.
Other Precautions:NONE. STORE LG QTY IN BUILDINGS PROTECTED FOR STORAGE
OF NEPA CLASS IC FLAMMABLE LIQUIDS.

Exposure Controls

Respiratory Protection:FOR CASUAL/OCCAS USE-TO AVOID BRTHG VAP/SPRAY
MIST, OPEN WINDOWS & DOORS/USE OTHER MEANS TO ENSURE FRESH AIR
ENTRY DURING APPLICATN & DRYING. IF YOU EXPER EYE WATER, HDCH/DIZZ,
INCR FRESH AIR, WEAR NI OSH/MSHA APPRVD RESP PROT (ING 11)
Ventilation:FOR REGULAR/CONTINUOUS USE-PROVIDE SUFFICIENT MECH(GEN)
&/OR LOC EXHAUST VENT TO MAINTAIN EXPOS BELOW TLV'S.
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WHERE SPECIAL/UNUSUAL CNDTNS EXIST, EXPERT
ASSISTANCE OF AN INDUST HYGIENIST SHOULD BE SOUGHT.
Work Hygienic Practices:WASH HANDS BEFORE EATING OR USING WASHROOM. AS
WITH ALL CHEMICALS, MINIMIZE PERSONAL CONTACT AND BREATHING OF
VAPORS.
Supplemental Safety and Health
FIRE FIGHT PROC: AUTOIGNIT/EXPLO WHEN EXPOS TO EXTREME HEAT. IF H2O IS
USED, FOG NOZZ ARE PREF. EXPLO HAZ: PILOT LIGHTS, OTHER FLAMES,
SPARKS, HEATERS, SMOKING, ELECTRIC MOTORS/OTHER IGNIT SOURCES @ L
OCATIONS DISTANT FROM MATL HNDLG PT. FIRST AID PROC: & WASH
CLOTHING BEFORE RE-USE.

Chemical Properties

HCC:V3
Boiling Pt:B.P. Text:>133F,>56C
Melt/Freeze Pt:M.P/F.P Text:>1500F,>816
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Spec Gravity:<1(H2O=1)
Evaporation Rate & Reference:INGRED 12
Solubility in Water:SLIGHT TO MODERATE
Appearance and Odor:TYPICAL SOLVENT PAINT
Percent Volatiles by Volume:85-90

Stability

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS AND HEAT.
Stability Condition to Avoid:HEAT, SPARKS, AND OPEN FLAME.
Hazardous Decomposition Products:MAY FORM TOXIC MATERIALS, CO2/CO,
VARIOUS HYDROCARBONS, NITROGEN CMPDS, ETC., WHEN BURNED.

Disposal

Waste Disposal Methods:MATERIAL COLLECTED ON ABSORBENT MATERIAL MAY BE
DEPOSITED IN A POSTED TOXIC SUBSTANCE LANDFILL IN ACCORDANCE WITH
LOCAL, STATE, AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.